С какими типами импоста может работать этот станок?

Станок подходит для большинства импостных профилей ПВХ, применяемых в оконных системах. При запуске мы проверяем ваши конкретные профили и подбираем оптимальные настройки.

Насколько точно формируется посадочное место под соединитель?

Фрезеровка обеспечивает стабильную геометрию торца импоста, что улучшает плотность стыка и снижает количество доработок при сборке створок и рам.

Нужно ли часто менять инструмент?

Срок службы инструмента зависит от объёмов производства и используемых профилей. Мы рекомендуем плановый контроль состояния фрез и подскажем регламент обслуживания под ваш поток.

PB 2015 Mullion End Milling Machine for Various Angles

Aluminium Mullion end-milling machines

KABAN PB 2015

Machine for Milling Mullion Ends at Various Angles

Name: PB 2015 — Станок для фрезеровки торцов импоста под различным углом
Brand: KABAN
SKU: PB 2015

The PB 2015 machine is a professional KABAN solution for machining aluminium mullion profiles.

Price on request Depends on configuration and delivery — we will send a quotation within 30 minutes

WhatsApp Telegram PDF brochure

Report a problem or suggest an improvement

Supplied directly from the KABAN factory, with warranty
Commissioning and training at your plant
Service and spare parts in Central Asia

Purpose

The PB 2015 machine is a professional KABAN solution for machining aluminium mullion profiles. The equipment performs end milling over a wide range of angles, ensuring precise joining of components without manual fitting. The mechanical design is built for long-term industrial use, and the system of stops and adjustments allows quick changeover between different profile systems.

The PB 2015 increases the speed and consistency of mullion preparation, reduces the risk of defects and eliminates the deviations that occur with manual machining. This makes it an effective solution for factories seeking to standardise and speed up the sash and frame assembly stage.

Advantages and equipment

Robust mechanical construction enabling high-quality profile machining.
Milling of PVC mullion profile ends in an angle range of -22.5° +45°.
Simple knife group replacement system
Easy angle adjustment using mechanical stops.
Stop system that can be set up for four different profiles.
Cutting speed adjustment via a hydro-pneumatic system.
Shelf for storing knives.

Machine operation videos

Spare parts and documentation

Photo-based part searchTake a photo of the part — we will find it in the catalogue Search by part numberPB 2015 spare parts with prices

Assembly diagrams 30

Machine for milling angled mullion ends (general view)18 parts PB 2010 frame assembly group set54 parts Blade change shaft connection set - 328 mm2 parts Foot pedal mounting kit7 parts Ø40 piston clamping assembly - left6 parts Switch tongue pusher assembly set4 parts Clamping pneumatic cylinder KST-040-080 (nylon/66, black)11 parts Safety switch interlock kit6 parts Lock tongue mounting set6 parts Oil tank6 parts Air preparation unit (conditioning unit)5 parts Table and supports assembly30 parts Shock-absorbing piston 550 mm - PB 201014 parts Main frame22 parts Motor and blade drive group kit32 parts Air preparation unit2 parts Oil tank mounting group9 parts Pneumatic cylinder 050-0400 (cushioned, magnetic)22 parts Upper protective cover19 parts Graduated stop group17 parts PB 2010 profile adjustment group kit9 parts Speed adjustment group3 parts Switch group4 parts Emergency button panel6 parts Motor mounting group kit8 parts PB 2010 blade shaft kit - Ø30*165.5 mm4 parts Spring exhaust throttle kit 1/43 parts Lift-and-turn handle (nylon/66)2 parts Profile clamping piston group3 parts Valve set6 parts

FAQ

What types of mullion can this machine handle?

The machine suits most PVC mullion profiles used in window systems. At commissioning we check your specific profiles and select the optimal settings.

How accurately is the seat for the connector formed?

Milling ensures consistent mullion end geometry, which improves joint tightness and reduces rework when assembling sashes and frames.

Does the tooling need to be replaced often?

Tool life depends on production volumes and the profiles used. We recommend scheduled inspection of the cutters and will advise a maintenance schedule suited to your throughput.

Average axis speed 100 m/min
Profile machining length 10300 mm

Learn more

Turnkey factory setup with PB 2015

We will select the entire line: cutting, machining, welding, cleaning, assembly — and launch production.